1 paar Verteilerkasten für Drop Wire Modul/STB Modul
Holen Sie sich aktuelle PreisZahlungsart: | L/C,T/T,Paypal,Western Union |
Incoterm: | FOB,CFR,CIF |
Minimum der Bestellmenge: | 1000 Piece/Pieces |
Transport: | Ocean,Land,Air |
Zahlungsart: | L/C,T/T,Paypal,Western Union |
Incoterm: | FOB,CFR,CIF |
Minimum der Bestellmenge: | 1000 Piece/Pieces |
Transport: | Ocean,Land,Air |
Modell: YL-2010-1
Marke: YL
Verkaufseinheiten | : | Piece/Pieces |
Pakettyp | : | 200pcs/Karton |
Wir liefern 1 paar Box für Drop-Wire Modul/STB Verteilermodul mit sehr wettbewerbsfähigen Preisen, jedes einzelne Stück von 1 paar Box für Drop-Wire Modul/STB Verteilermodul wird in der Werkstatt vor Auslieferung an den Kunden getestet. LWL Kabel 1 paar Box für Drop-Wire Modul/STB Verteilermodul entwickelt und hergestellt in ISO 9001 registriert Anlage. Die Produktpalette umfasst sowohl Singlemode und multimode Zöpfen und Zöpfen die vollqualifizierten RoHS Standards sind. Baugruppen sind in allen wichtigen Faser LWL Steckertypen verfügbar; eine Reihe von Kabel-Farb-Optionen zur Verfügung.
1 paar Distribution Box für Drop Wire Modul/STB Modul
Beschreibung
Passt sich der Klemmleiste des Anschlusses für den Anschluss der distributiven Drähte der äußeren und inneren Polsterung. Seine Konstruktion bietet die Möglichkeit der Durchführung von Kontrollmessungen der angeschlossenen Ketten vor beide Richtungen. Box bietet Schutz vor den Auswirkungen auf die Umwelt.
Klemmenblock der Verbindung besteht aus Gehäuse und Abdeckung der rechteckigen Form, und auch 5 - polar Gerät der Anschluss am Gehäuse befestigt. Abdeckung ist darüber hinaus die gemeinsame Achse mit dem Gehäuse fest; Allerdings kann es aus dem Gehäuse garantieren den Komfort bei der Arbeit aufgrund der gepressten isoliert werden. Die Einführung der Leitungen wird durch die abnehmbare Stopfbuchsen erreicht, die die Möglichkeit der Anwendung der Drähte in verschiedenen Größen zu gewährleisten. Befestigung der Drähte wird erreicht, indem die metallischen Schrauben, befindet sich im Inneren des Gerätes Verbindung.
Größen
Technische Merkmale
Merkmale der Kontaktverbindung
Anschluss des Distributivgesetzes Drahtes
Range of the section: |
diameter 0,4- 1,2 mm |
Diameter on the isolation: |
it is maximal 5 mm |
The current-response characteristics: |
20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance * |
|
[Dry" atmosphere: |
> 10 12 Ohm |
[Moist" atmosphere (standard ASTM Of d618, procedure F): |
> 10 12[Om] |
Salt fog: (standard ASTM Of b117) |
> 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) |
> 10 10 0[m] |
The contact resistance |
|
R of material + R of the contact cross connection + by R of the contact connection of the wires |
< 10 m |
Increase in the contact resistance |
|
After climatic testings: |
<2,5 m |
After 50 connections - turning offs: |
<2,5 m |
Dielectric strength: |
>3 kV of direct current during 1 minute |
Mechanische Eigenschaften
Screw of the connection of the distributive wire/conductor of the pair |
Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection of the distributive wire: |
Transparent polycarbonate |
Housing: |
Polycarbonate, glass-reinforced, resistance to fire [VO" |
Fitted contacts: |
Tinplated phosphor bronze |
Contacts of the grounding: |
Alloy of SI - Zn - Ni - Ag |
Contacts of the connection: |
Tinplated solid bronze |
Sealing material before the lower part: |
The epoxy resin |
Sealing material before the upper cable part: |
Silicon compound |
Cover of the pair/of the distributive wire: |
Polycarbonate |
Housing of the insertable module: |
Polycarbonate, glass-reinforced, resistance to fire [VO" |
Sealing material of the insertable module: |
Gel |
The ring gasket: |
Elastomer EPDM |
Cable laying is/the distributive wire |
Thermoplastic rubber |
Housing and the cover of the box: |
Polycarbonate, color RAL 7035 |
Unit of the grounding: |
Stainless steel |
Stuffing box: |
Elastomer EPDM |
Warum uns wählen?
Wir spezialisieren uns auf die Herstellung aller Arten von Networking-Produkte wie Kabel, Patch-Panels, Buchsen, Stecker, Faceplates, Schränke, LWL Kabel, Patchkabel und drahtlose Geräte. Es ist unsere eigene Marke "YULIANG". Wir fungieren auch als Agenten für viele namhafte Unternehmen. Wir haben 8 automatische Produktionslinien durch geschickte Arbeiter betrieben. Alle unsere Produkte werden streng nach den Standards von ISO9001 hergestellt.
Wir bieten feine After-Sales-Services. Wenn es irgendeine Frage, bitte zögern Sie nicht, uns jederzeit zu kontaktieren.
Bestellungen:
Unsere Produkte sind beliebt bei Nordamerika, Südamerika, Osteuropa, Westeuropa, Mittelamerika, Nordeuropa, Südeuropa, Naher Osten, Afrika. Und sie erreichten guten Ruf zur gleichen Zeit. Wir bieten auch OEM- und ODM Service entsprechend Anforderung des Kunden. Ihre Bestellung sind willkommen!
Lieferung:
Im Allgemeinen liefern wir innerhalb von 7-10 Tagen nach Zahlungseingang. Unterdessen konnten wir wettbewerbsfähigen Bedingungen Versandservice für Sie, auf dem Seeweg, per Flugzeug oder per Expresslieferung zur Verfügung stellen. Natürlich können Sie anders benennen, wie Sie möchten.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.